1.9” Dia. X 16 Ga. Galvanized Steel Gravity Roller Conveyor (Roach Model 196G)

Features Non-powered roller conveyors or gravity conveyors are the most economical and common method of conveying unit loads

• Typically mounted on a slight decline angle, therefore using gravity to assist product movement, especially for long distances
• Protective zinc coating to prevent rusting
• Can provide no-contact accumulation of product
• Cost effective

Applications

• Essential for packaging facilities, manufacturing plants, and distribution facilities, gravity roller conveyors allow quick transportation of bulk materials
• Convey loads of wire bins, canisters, barrels, wooden boxes, drums, lumber, cartons, totes, & cardboard boxes
• Use in applications where the conveyor is level and operators can push the product along to its final destination, allowing for multiple workstations, as necessary
• Used on conveyor lines in warehouses, shipping areas, assembly areas and more

Specifications

• Rollers: 1.9” x 16 ga. galv. steel tubing, model 196G, with smooth swaged ends.
• Frames: Formed steel painted channel 3- 1/2” x 1-1/2” x 10 ga. set high; 4- 1/2” x 1-1/2” x 10 ga. set low.
• Bearings: Integral plain ball bearings, zinc plated, grease packed.
• Frame Capacity: 250 lbs. per roller, or 1300 lbs. maximum distributed live load per 10’ section with supports at 10’ centers; 3200 lbs. at 5’ centers.
• Couplings: Butt type
• Axles: 7/16” hex shaft, spring loaded
• Optional Frame: 4” @ 5.4 lbs. struc. steel channel frame, rollers 3/16” high, may vary due to structural tolerances.

At Thomas Conveyor, our systems integrators are available to help you determine if the 1.9" diameter x 16 gauge galvanized steel straight  (Model 196G) or curved gravity roller conveyor (Roach Model 196GC is the correct gravity roller conveyor for your application.  Please contact a Thomas Conveyor & Equipment Automation Engineer at 844 220 0086 or click on the Contact Us button above for additional information.